What is the Control Mount warranty?

All Control Mount products are warrantied for 1 year from the time of purchase. For the full warranty terms please refer to the warranty section, which can be found here.


What is the Control Mount return policy?

Please refer to our online sales and return policy by clicking here.


How do I power the Control Mount?

The Control Mount ships with an AC to DC power supply and Electronics Board that is used to power the Control Mount system.  To learn more about these, click here.


Can I use the Mic and Speaker from the iPad while in the Control Mount?

Not at this time.


Can I plug a line out into the headphone jack of the iPad?

No. For best results, we suggest using a wireless streaming technology such as AirPlay or Sonos and use the iPad as a controller instead of an audio source.


Do you make Control mount for other Manufactures?

Not at this time.  However, If you have a specific need for a large quantity of Control Mount for a specific device, please contact us at enterprise@iportproducts.com


Can I use the Control Mount outside?

No. The Control Mount was designed for use indoors.


Can I use the iPad Air with the CM-IW2000 V2?

No. The CM-IW2000 V2 was designed for the iPad, iPad 2, iPad 3rd and and iPad 4th generations.


Can I buy replacement parts fort the Control Mount?

Yes. You can order replacement parts here.


I purchased a new iPad to replace my original 1st generation iPad-in-CM-IW2000. How do I upgrade my CM-IW2000 to work with my new iPad?

We have a power upgrade kit and a fit kit available if you are upgrading from the 1st Generation iPad to the 2nd, 3rd or 4th iPad. If you have the 2nd generation iPad and look to upgrade to the 3rd or 4th you do not need the Fit Kit.  To purchase these items, please contact us at support@iportproducts.com as we do not carry these products on our website.


Do you offer different color Control Mounts?

The Control Mount bezel is white, but it is paint-ready meaning it can be painted any color.


My Control Mount will not charge my iPad any Longer.

Please refer to the iPort Troubleshooting Guide found here.  If you need support, please visit our support page and fill out a support inquiry.


Can I use CAT5 or CAT6 wire to remotely power my Control Mount?

Yes. You can group the 8 strands into 2 conductors, keeping note to match to colored strands on each end, and run the wire up to 200 feet away from the power supply.


What kind of power supply is required to run the Contorl Mount?

The Control Mount can operate between 12-24V (1A) DC. The included power supply provided is 110/240V AC input and 15V 1A output.  However, you can use any power supply between 12-24V DC output to power a Control Mount, provided the power supply can deliver at least 10W of power to the control mount.  You can even use an industrial DC high wattage power supply to power multiple Control Mounts from one supply.  These power supplies are typically 13.8V DC output and range from 100-200W output. To learn more about our flexible VoltPort power system on board our current Control Mount line up, click here.

1 Comment

Compare Products
LaunchPort Charge Case & Stand Control Mount
Charging Wireless Inductive Charging Wireless Conductive Charging Wired Conductive Charging
Mount Type Magnetic, Temporary On-Wall and Tabletop Magnetic, Temporary Tabletop Semi-Permananet In-Wall
Mount Portrait or Landscape? Yes Yes Yes
Protection Up to 6 ft drop Up to 3 ft drop N/A
Color Options Soft Touch Black, High Gloss White Soft Touch Black Flat, Paint-ready white
Security Solution? Yes. Optional Security Pack locks 2 halves of iPad Sleeve together and tethers Sleeve to a fixture. No Yes. Included Tether may be used with security screws for theft deterrance.
Optional, Programmable Hard Buttons? Yes: LaunchPort Sleeve Buttons No No
Key Applications Temporary Wall Mount, Table-top mount Table-top Mount, BOYD Solution for Businesses In-Wall Mount, Digital Signage Solution
Minimum System Requirements 1 Charging Station with power supply, 1 iPad Sleeve 1 Charge Stand with power supply, 1 iPad Charge Case 1 Mounting assembly and fascia, 1 wall box with power supply and DC low voltage conversion electronics
Mounting Angles N/A 3 Differenct Orientations N/A
Mounting Orientations Portrait or Landscape Portrait or Landscape Portrait or Landscape
Access to Apple lightning port while case is on? No Yes N/A
System Price From $339 From $159 From $329

VoltPort® Technology

iPort's VoltPort technology, onboard every Control Mount, provides the greatest flexibility in how iPads can be powered when installed:

  • Power iPads from power supplies between 12-24V DC: use 16 AWG Wire up to 400 Ft. from power supply using a 24V DC power supply.
  • Power multiple iPads from 1 industrial power supply, typically a 13.8V DC high wattage supply. In an example where a 200W, 13.8V power supply is used, up to 16 iPads in Control Mounts may be powered from one supply.
  • VoltPort electronics provide a green "OK LED" which confirms iPad will be adequately powered.  Great for "bench testing" combinations of wire type, wire distance and power supply.

iPort Enterprise Sales Team


+1 949 226 5222


We look forward to speaking with you.

iPort Company Holidays 2015

New Years DayThu, Jan 1st

President's DayMon, Feb 16th

Memorial DayMon, May 25th

Independence DayFri, Jul 3rd

Founder's DayMon, Jul 6th

Labor DayMon, Sep 7th

ThanksgivingThu, Nov 26th

Day After ThanksgivingFri, Nov 27th

Christmas EveThu, Dec 24th

ChristmasFri, Dec 25th

New Year's EveThu, Dec 31st

Where to Find Your iPort Product Serial Number

All iPort products contain a serial number.  This number appears in several locations:  On the inside or bottom of the product itself and on the bottom or back of the product packaging.  If you need further assistance in locating your product's serial number, click here.