Residential Applications


The New Face of Home Automation

The use of iPad as a home technology controller has grown dramatically in recent years.  This trend is due to ubiquitous support of Apple's iOS devices by industry-leading control systems like Savant, Lutron, Crestron, RTI, Control 4 and more. Today, iPad is the central touch-point connecting a homeowner with the technology in their home. This touch point gives them the ability to control lights, shades, AV, security and more.


Hold. Charge. Protect. Integrate.

As the iPad’s influence has increased throughout the home some important concerns have been identified. First, there is no permanent holding place or home base for iPads sometimes making it difficult to locate one when you need to use it. Second, used often iPad batteries drain quickly. Lastly, iPads are not protected from the accidental slips and falls that happen in a busy household.

iPort’s suite of products are specifically designed to hold, charge, and protect the iPad so that it continues to be the center of your home’s AV ecosystem.


Surface Mount

With Surface Mount you have the ability to elegantly integrate iPad onto any surface.  Your mounting system should look amazing and be an aesthetic compliment to its surroundings.  

Surface Mount with Buttons

Surface Mount with buttons

Control Mount

Control Mount can be used as a control touch panel or information center in the home. With its paintable bezel, Control Mount will blend into a variety of decors, maintaining the elegance of your space.


Powered through revolutionary inductive charging, the LaunchPort system allows you to charge your iPad without the hassle of cables or wires.  Whether you're charging on wall with the WallStation, or on a tabletop using the BaseStation, LaunchPort serves as a home for your iPad.  

LaunchPort with Buttons

Say hello to LaunchPort with Buttons, the world’s first programmable, independently functioning buttons on an iPad case. With the addition of Buttons that provide immediate access to key controls, LaunchPort becomes a vital necessity in any home automation control system.

Charge Case & Stand

Using a combination and conductive charging, the Charge Case & Stand effortlessly charges iPad in either portrait or landscape orientations.  Always charged and always ready, the Charge Case & Stand has a removable lightning module that allows for charging with a cable while on the go.

Compare Products
LaunchPort Charge Case & Stand Control Mount
Charging Wireless Inductive Charging Wireless Conductive Charging Wired Conductive Charging
Mount Type Magnetic, Temporary On-Wall and Tabletop Magnetic, Temporary Tabletop Semi-Permananet In-Wall
Mount Portrait or Landscape? Yes Yes Yes
Protection Up to 6 ft drop Up to 3 ft drop N/A
Color Options Soft Touch Black, High Gloss White Soft Touch Black Flat, Paint-ready white
Security Solution? Yes. Optional Security Pack locks 2 halves of iPad Sleeve together and tethers Sleeve to a fixture. No Yes. Included Tether may be used with security screws for theft deterrance.
Optional, Programmable Hard Buttons? Yes: LaunchPort Sleeve Buttons No No
Key Applications Temporary Wall Mount, Table-top mount Table-top Mount, BOYD Solution for Businesses In-Wall Mount, Digital Signage Solution
Minimum System Requirements 1 Charging Station with power supply, 1 iPad Sleeve 1 Charge Stand with power supply, 1 iPad Charge Case 1 Mounting assembly and fascia, 1 wall box with power supply and DC low voltage conversion electronics
Mounting Angles N/A 3 Differenct Orientations N/A
Mounting Orientations Portrait or Landscape Portrait or Landscape Portrait or Landscape
Access to Apple lightning port while case is on? No Yes N/A
System Price From $339 From $159 From $329

VoltPort® Technology

iPort's VoltPort technology, onboard every Control Mount, provides the greatest flexibility in how iPads can be powered when installed:

  • Power iPads from power supplies between 12-24V DC: use 16 AWG Wire up to 400 Ft. from power supply using a 24V DC power supply.
  • Power multiple iPads from 1 industrial power supply, typically a 13.8V DC high wattage supply. In an example where a 200W, 13.8V power supply is used, up to 16 iPads in Control Mounts may be powered from one supply.
  • VoltPort electronics provide a green "OK LED" which confirms iPad will be adequately powered.  Great for "bench testing" combinations of wire type, wire distance and power supply.

iPort Enterprise Sales Team


+1 949 226 5222

We look forward to speaking with you.

iPort Company Holidays 2015

New Years DayThu, Jan 1st

President's DayMon, Feb 16th

Memorial DayMon, May 25th

Independence DayFri, Jul 3rd

Founder's DayMon, Jul 6th

Labor DayMon, Sep 7th

ThanksgivingThu, Nov 26th

Day After ThanksgivingFri, Nov 27th

Christmas EveThu, Dec 24th

ChristmasFri, Dec 25th

New Year's EveThu, Dec 31st

Where to Find Your iPort Product Serial Number

All iPort products contain a serial number.  This number appears in several locations:  On the inside or bottom of the product itself and on the bottom or back of the product packaging.  If you need further assistance in locating your product's serial number, click here.